The default boot source for the congatec i.MX 8X family products is SD card
In order to place the rootfs into the eMMC, the scard image could be copy into a USB stick. Start and login into the system, with the USB plugged into
| Code Block | ||
|---|---|---|
| ||
$ cd /run/media/sda1
$ dd if=22.02.2019_fsl-image-qt5-imx8qxp-cgt-qx8x.sdcard of=/dev/mmcblk0 status=progress
$ sync
$ poweroff |
conga-SMX8-X
Change the switches on conga-SEVAL
SW17 = [1] off / [2] on
SW18 = [1] off / [2] off
conga-QMX8-X
Check with R&D
Boot the system again, and stop the bootloader autoboot
| Code Block | ||
|---|---|---|
| ||
setenv mmcdev 0
setenv mmcroot /dev/mmcblk0p2 rootwait rw
saveenv
boot |