For ARM designsconga-QMX6, the default boot configuration is determined by either hardware configuration (bootstrapping pins) or OTP bootfuses.The default boot mode is: mode is to boot from the SoC OTP bootfuses, which in our manufacturing process are configured to boot from SPI flash. This cannot be changed after the OTP fuses programming is done, so conga-QMX6 modules will always try to boot from SPI flash. This is configured by bootfusesThe only way to change this is to create a customized article where the OTP fuses are programmed in some other way.
On standard variants of conga-QMX6, only boot from SPI is supported.